| |
| PVC SEWER PIPE |
| ASTM D-3034 PSM |
| Belled End Product Data |
| |
| Northern Pipe Products PVC Belled End Sewer Pipe is made from components conforming to material specification ASTM D-1784, and meets all dimensional and physical specifications of ASTM D-3034. 4-inch through 6-inch is manufactured in 10 foot overall lengths, while 8-inch through 15-inch is 13 foot laying length. |
| |
| |
 |
| |
| |
| PVC DRAINAGE PIPE |
| ASTM D-2729 |
| Belled End |
| |
 |
| |
| SEWER AND DRAINAGE PIPE |
| Solvent Weld Joint Dimensions |
| |
 |
| |
| NOTE: ASTM 2729 is available perforated; please note when ordering. |
| |
| PVC PIPE PERFORATION SPECIFICATION |
| ASTM D-3034 PSM Sewer Pipe |
| ASTM F-758 Highway Underdrain Systems |
| ASTM D-2729 PVC Drainage Pipe |
| |
| SOLVENT WELD JOINTS |
| All lengths are overall lengths |
| |
 |
| |
| GASKETED JOINTS |
| All lengths are overall lengths |
| |
 |
 |
| |
| PVC GRAVITY SEWER PIPE |
| ASTM D-3034 PSM |
| Gasketed Pipe Product Data |
| |
| Northern Pipe Products PVC Gasketed Sewer Pipe is made from compounds conforming to the requirements of ASTM D-3034 in accordance with ASTM D-1784. Sewer Pipe 4 inch through 15 inch meets all dimensional and physical specifications of ASTM D-3034. 18-inch Sewer Pipe meets all dimensional and physical specifications of ASTM F-679. 4-inch through 15-inch SDR-35 and 18-inch PS-46 are available with the CSA (Canadian Standards Association) mark of acceptance. All Gasketed Sewer Pipe is manufactured to laying lengths. |
| |
 |
| |
| ASTM F-679 PS-46 T-1 |
| |
 |
| * This information is provided for reference. Northern Pipe Products does not manufacture sewer pipe over 18" in diameter. |
| D-3034 GASKET JOINT PVC SEWER PIPE |
| |
| Northern Pipe Products PVC Gasketed Sewer Pipe is made from gasketed joints comforming to ASTM D-3212 (Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastromeric Seals). All gaskets conform to ASTM F-477 (Standard Specification for Elastromeric Seals for Joining Plastic Pipe). Spigot ends are beveled and insertion depths are marked for correct installation. |
| |
| LOCKED-IN GASKET JOINT |
| |
 |
| |
 |
| |
